Nitrogen Gas Maschine

Nitrogen Gas Generator : Nitrogen Gas Generator

    Nitrogen gas generator for industrial work, cheap, convenient, no nitrogen trading contract and safer when compared to using liquid nitrogen gas and pre-packaged nitrogen ampoules

In the air, there is about 78% nitrogen gas and 21% is oxygen, therefore nitrogen gas is used in various industries. Because nitrogen gas has engineering properties as an inert gas.

Insensitive to various reactions, therefore, nitrogen gas is commonly used as a shielding gas. Prevent the reaction of chemicals with air. Makes the workpiece not rust, such as steel industry, aluminum

metallurgy, electronics, petrochemicals, automotive, etc. In addition, nitrogen is most commonly used in the food industry. Because it is a colorless, odorless, tasteless gas, very little soluble in water and fat.

      thus reducing the oxidation reaction and the rancidity of fats and oils in food. Therefore suitable for use in food preservation, such as packing food such as potato chips and various snacks.

Or liquid products such as vegetable oil, etc., which allows manufacturers to extend the shelf life of the product even longer.   Currently, there are nitrogen gas producers in the form of liquid nitrogen gas. to send to various factories by plants that consume a lot of nitrogen gas There will be a price to order cheaper than the factory with a small amount of use.

In addition, the price of liquid nitrogen gas also depends on the transportation price of oil with an upward trend We therefore see the importance of producing nitrogen gas for our own use in the factory. 

which can be easily controlled maintenance is not complicated where the starting price of nitrogen gas production for own use Compared to liquid nitrogen will have a lower cost As a result, users have the opportunity to make more profits in the long run.

Purity

Nitrogen generators can select the purity level of nitrogen that needs to be produced in two levels, standard purity.

and high purity (High purity) with nitrogen purity ranging from 90% – 99.99999 %

Working of Nitrogen Generator

Working of Nitrogen Generator Start by taking compressed air from the air compressor (Air compressor) which flows through the Air dryer.

To dry the air by setting the dew point temperature at 3 C, after which the wind will be filtered by a filter (Filter).

Size 1, 0.01 micron and carbon filter (Carbon filter) one more step respectively for better air quality without oil vapor (Oil free) It also helps to prolong the life of the CMS (Carbon Molecular Sieve) granules. Normally, CMS tablets will last about 8-10 years. Compressed air is then sent into a holding tank. 

To wait for use in the next nitrogen gas production process, the nitrogen gas generator has 2 CMS pellet tanks to absorb oxygen. and extract nitrogen The two tanks will work alternately when the first tank is working. (oxygen is absorbed) nitrogen gas obtained will be sent to keep in the nitrogen holding tank of which about 10% of nitrogen gas

that can be produced will be sent to Another grain tank to expel oxygen gas out of the grain and vented to the atmosphere where the first tank absorbs oxygen gas up to the value set by the manufacturer

It will switch the working tank to a second tank. Nitrogen gas is produced and stored in the holding tank. Before use, it will be checked. purity value with purity meter of nitrogen gas (Nitrogen Analyzer) whether the purity value is as specified or not

Analogy

Advantages of producing your own nitrogen gas from a nitrogen generator when compared to using from ready-made nitrogen containers such as bulk liquid nitrogen

Nitrogen cylinders (Nitrogen cylinder) are as follows

1. Nitrogen gas generator save than the use of liquid nitrogen gas 80% and more economical than the use of 100% nitrogen tubes (no tubes needed)

2. Nitrogen gas generator is more safety. because using lower pressure Compared to nitrogen filled ampoule The nitrogen gas generator uses only 6-10 bar of pressure to produce from the air pump to the machine.

while the nitrogen tube There will be a higher pressure of about 125-250 bar compared to using liquid nitrogen, which if a leak occurs. It may cause harm to the user. Because the liquid nitrogen It has a low temperature of about –196 °C.

3. The use of nitrogen gas generators eliminates the need to enter into contracts to purchase ready-made nitrogen from vendors. Which has various obligations in terms of transportation quantity of each order, etc.

While the production of nitrogen for own use is convenient and can be produced on time.

Implementation

Industries that can use nitrogen gas generators such as

– industry
– Chemical Industry
– Electronic Industry
– Laser cutting
– Food processing and packaging
– Inflating car tires
– Plastic Industry (inject mold)
– pharmaceutical production

In addition, in industrial plants, nitrogen gas is used in the storage or stock material post process, used in the packaging process before finishing products, where nitrogen is stored in the packaging. to prolong the life of the drug Prevent the reaction that will change the properties of the drug.

PRODUCT