Menu Close

Nitrogen Generator for Factory

Nitrogen generator

Nitrogen Generator for factory installation

Nitrogen gas generators for industry are more cost-effective than using nitrogen gas cylinders or liquid nitrogen. It’s also more secure. Pressure that is not as high as the tank type Nitrogen gas generators provide high nitrogen purity. easy to maintain

Type of Nitrogen Generator : Type of Nitrogen Generator

 

nitrogen gas generator This can be divided into main parts.

Pressure Swing Adsorption : PSA Nitrogen Generator

Membrane

Granular Nitrogen Gas Generator : PSA Nitrogen Generator is the use of Carbon Molecular Sieve : CMS.

absorb oxygen molecules and allow pure nitrogen gas to pass through and store in the nitrogen holding tank for use in various industries

 

such as

food and beverage industry

electronics industry

packing industry

chemical industry

petroleum industry

waste disposal industry

laboratory

 

By virtue of the properties of nitrogen gas. that is an inert gas in the engineering process or manufacturing process in the factory It prevents reactions with chemicals in the system. Nitrogen air is therefore very useful in industry.

Working principle of nitrogen gas generator

 

Working of Nitrogen Generator Starting from the air that comes from the air compressor (Air Compressor) through to the air dryer (Air Dryer).

to dry the wind The more dry the air, the more beneficial it is for the nitrogen generator because the granule used in the nitrogen generator is a Cabon Molecular Sieve.

Will last a long time without water, oil and dust.

Carbon Molecular Sieve

 

When the compressed air passes through the Air Dryer, it will pass through the air filter as well. Main line filter that has the ability to filter particles size 5, 1, 0.01 microns.

 

and Activated carbon filter to filter oil particles. Provides clean, oil-free compressed air To extend the life of the Cabon Molecular

Sieve granules to more than 10 years, clean compressed air is stored in the air recovery tank. to prepare for the next nitrogen gas generator Inside the nitrogen gas generator It contains 2 barrels of Cabon Molecular Sieve.

 

based on the principle of molecular size of Nitrogen, which is larger than oxygen molecules. This causes the wind to pass through the Cabon Molecular Sieve (CMS).

 

will be a nitrogen molecule that can pass through But the oxygen molecules are adsorbed in the Cabon Molecular Sieve (CMS).

 

Inside the nitrogen gas generator is a switch operation. Inside the nitrogen gas generator there is a Cabon Molecular Sieve (CMS).

Containing 2 tanks, 

Nitrogen Gas Generator

when the first tank is working absorb oxygen molecules Nitrogen air will flow to the nitrogen air storage tank. 

 

And when the second tank is working, the Cabon Molecular Sieve (CMS) will absorb molecular oxygen (PSA Nitrogen Generator). 

It will be vented from the nitrogen gas generator. Nitrogen air from the second tank will flow to the nitrogen holding tank as well.

 

Nitrogen purity will be checked before leaving the nitrogen gas generator. If the purity of air nitrogen is not obtained The wind will then be given back through the production process again. But if the purity of the nitrogen wind has been set Nitrogen air can then be released from the nitrogen gas generator to use.

Working of PSA Nitrogen Generator

 

Purity and size of nitrogen gas generator

 

Nitrogen Generator can produce nitrogen gas with purity ranging from 95%, 97%, 99%, 99.9%, 99.99%, 99.999%.

 

The purity and flow rate can be adjusted. and can produce nitrogen gas up to 6,000 Nm3/hr as well as the nitrogen gas generator There is also a screen showing the operation of the machine. display values such as purity value (Purity), flow rate (Flow rate), Dew point, Pressure

 

of wind and nitrogen Including opening-closing of each valve position convenient and easy to use

 

Nitrogen generator 

siam water flame

 Nitrogen Generator for factory installation
Nitrogen gas generators for industry are more cost-effective than using nitrogen gas cylinders or liquid nitrogen. It’s also more secure. 
Pressure that is not as high as the tank type Nitrogen gas generators provide high nitrogen purity. easy to maintain
Type of Nitrogen Generator : Type of Nitrogen Generator
nitrogen gas generator This can be divided into main parts.
Pressure Swing Adsorption : PSA Nitrogen Generator
Membrane
Granular Nitrogen Gas Generator : PSA Nitrogen Generator is the use of Carbon Molecular Sieve : CMS.
absorb oxygen molecules and allow pure nitrogen gas to pass through and store in the nitrogen holding tank for use in various industries
such as
food and beverage industry
electronics industry
packing industry
chemical industry
petroleum industry
waste disposal industry
laboratory
By virtue of the properties of nitrogen gas. that is an inert gas in the engineering process or manufacturing process in the factory It prevents reactions with chemicals in the system. Nitrogen air is therefore very useful in industry.

 

Working principle of nitrogen gas generator

Working of Nitrogen Generator Starting from the air that comes from the air compressor (Air Compressor) through to the air dryer (Air Dryer).
to dry the wind The more dry the air, the more beneficial it is for the nitrogen generator because the granule used in the nitrogen generator is a Cabon Molecular Sieve.
Will last a long time without water, oil and dust.
 
Carbon Molecular Sieve
When the compressed air passes through the Air Dryer, it will pass through the air filter as well. Main line filter that has the ability to filter particles size 5, 1, 0.01 microns.
and Activated carbon filter to filter oil particles. Provides clean, oil-free compressed air To extend the life of the Cabon Molecular Sieve granules to more than 10 years, clean compressed air is stored in the air recovery tank. to prepare for the next nitrogen gas generator Inside the nitrogen gas generator
 
It contains 2 barrels of Cabon Molecular Sieve.
based on the principle of molecular size of Nitrogen, which is larger than oxygen molecules. This causes the wind to pass through the Cabon Molecular Sieve (CMS).
will be a nitrogen molecule that can pass through But the oxygen molecules are adsorbed in the Cabon Molecular Sieve (CMS).
 
Inside the nitrogen gas generator is a switch operation. Inside the nitrogen gas generator there is a Cabon Molecular Sieve (CMS).
 
Containing 2 tanks, 

Nitrogen Gas Generator

when the first tank is working absorb oxygen molecules Nitrogen air will flow to the nitrogen air storage tank. And when the second tank is working, the Cabon Molecular Sieve (CMS) will absorb molecular oxygen ( PSA Nitrogen Generator ). It will be vented from the nitrogen gas generator. Nitrogen air from the second tank will flow to the nitrogen holding tank as well.
 
Nitrogen purity will be checked before leaving the nitrogen gas generator. If the purity of air nitrogen is not obtained The wind will then be given back through the production process again. But if the purity of the nitrogen wind has been set Nitrogen air can then be released from the nitrogen gas generator to use.
 

Working of PSA Nitrogen Generator

 
Purity and size of nitrogen gas generator
Nitrogen Generator can produce nitrogen gas with purity ranging from 95%, 97%, 99%, 99.9%, 99.99%, 99.999%.
 
The purity and flow rate can be adjusted. and can produce nitrogen gas up to 6,000 Nm3/hr as well as the nitrogen gas generator There is also a screen showing the operation of the machine. display values such as purity value (Purity), flow rate (Flow rate), Dew point, Pressure
of wind and nitrogen Including opening-closing of each valve position convenient and easy to use
 
Nitrogen generator Nitrogen generator
 

Nitrogen Generator for factory installation

 
Nitrogen gas generators for industry are more cost-effective than using nitrogen gas cylinders or liquid nitrogen. It’s also more secure. Pressure that is not as high as the tank type Nitrogen gas generators provide high nitrogen purity. easy to maintain
 
Type of Nitrogen Generator : Type of Nitrogen Generator
nitrogen gas generator This can be divided into main parts.
Pressure Swing Adsorption : PSA Nitrogen Generator Membrane
 
Granular Nitrogen Gas Generator : PSA Nitrogen Generator is the use of Carbon Molecular Sieve : CMS.
absorb oxygen molecules and allow pure nitrogen gas to pass through and store in the nitrogen holding tank for use in various industries
 
such as
Food and beverage industry
electronics industry
packing industry
chemical industry
petroleum industry
waste disposal industry
laboratory
 
By virtue of the properties of nitrogen gas. that is an inert gas in the engineering process or manufacturing process in the factory It prevents reactions with chemicals in the system. Nitrogen air is therefore very useful in industry.

Working principle of nitrogen gas generator
 
Working of Nitrogen Generator Starting from the air that comes from the air compressor (Air Compressor) through to the air dryer (Air Dryer).

 

to dry the wind The more dry the air, the more beneficial it is for the nitrogen generator because the granule used in the nitrogen generator is a Cabon Molecular Sieve.
Will last a long time without water, oil and dust.
Carbon Molecular Sieve
 
When the compressed air passes through the Air Dryer, it will pass through the air filter as well. Main line filter that has the ability to filter particles size 5, 1, 0.01 microns.
 
and Activated carbon filter to filter oil particles. Provides clean, oil-free compressed air To extend the life of the Cabon Molecular Sieve granules to more than 10 years, clean compressed air is stored in the air recovery tank. to prepare for the next nitrogen gas generator Inside the nitrogen gas generator It contains 2 barrels of Cabon
 Molecular Sieve.
 
based on the principle of molecular size of Nitrogen, which is larger than oxygen molecules. This causes the wind to pass through the Cabon Molecular Sieve (CMS).
will be a nitrogen molecule that can pass through But the oxygen molecules are adsorbed in the Cabon Molecular Sieve (CMS).
 
Inside the nitrogen gas generator is a switch operation. Inside the nitrogen gas generator there is a Cabon Molecular Sieve (CMS).
 
Containing 2 tanks, 

Nitrogen Gas Generator

 
when the first tank is working absorb oxygen molecules Nitrogen air will flow to the nitrogen air storage tank. And when the second tank is working, the Cabon Molecular Sieve (CMS) will absorb molecular oxygen 
 
(PSA Nitrogen Generator). It will be vented from the nitrogen gas generator. Nitrogen air from the second tank will flow to the nitrogen holding tank as well.
 
Nitrogen purity will be checked before leaving the nitrogen gas generator. If the purity of air nitrogen is not obtained The wind will then be given back through the production process again. But if the purity of the nitrogen wind has been set Nitrogen air can then be released from the nitrogen gas generator to use.

Working of PSA Nitrogen Generator
 
Purity and size of nitrogen gas generator
Nitrogen Generator can produce nitrogen gas with purity ranging from 95%, 97%, 99%, 99.9%, 99.99%, 99.999%.
The purity and flow rate can be adjusted. and can produce nitrogen gas up to 6,000 Nm3/hr as well as the nitrogen gas generator There is also a screen showing the operation of the machine. display values such as purity
value (Purity), flow rate (Flow rate), 
Dew point, Pressure

of wind and nitrogen Including opening-closing of each valve position convenient and easy to use
 
Nitrogen generator Nitrogen generator
 
เครื่องผลิตไนโตรเจน
error: Content is protected !!